Logu un durvju sistēmas

PONZIO PE 40

System description

Aluminium system profiles without the thermal insulation, mainly dedicated to the interior of buildings: boxes, partition walls, display cases, sliding doors (manually or automatically operated), double and single acting doors. The structural depth equals 40 mm. The PE 40 system allows to use the variety of fillings: glass, aluminium panels, “sandwich” fillings, panel boards and PVC. The regular doors can be assembled in the PE 40 system. The advantage of axial clamped hinges is an ease of assembly in three planes.

Characteristics of system
– precise relation to other Ponzio systems (mutual corners, beadings, toolset and major of hardware)
– many possibilities of accomplishing door leaves: with wide beam or profiles cut at an angle of 45 degrees, with or without threshold
– bending or twisted profiles
– the usage of Euro groove allows to assemble variety of accessories

Aluminium profiles
EN AW-6060 according to PN-EN 573-3 T66 according to PN-EN 515 Al Mg Si 0,5 F22 according to DIN 1725 T1, DIN 17615 T1
Gaskets
EPDM synthetic rubber according to DIN 7863 and standard according to DIN ISO 3302-1, E2
Hardware
renowned companies only: Fapim, Savio, Iseo, Cisa, Hautau, Geze, KFV, etc.
Fillings
single or packet window panels with any kind of glass or opaque panels in the width of 1-23 mm
Surface finishing
powder coating with polyester on chromate undercoater according to the Qualicoat standards, any RAL colour at choice; anodized in colours: natural aluminium, olive, champagne, gold, brown – according to Qualanoad standards, lacquered for colour imitating wood
Permissions and quality certificates
Technical approval of Building Engineering Institute AT-15-8114/2015 “Internal doors and products set for the use partition walling of PE 40 Ponzio system”

PONZIO PT 50

System description
Aluminium system profiles without the thermal insulation, mainly dedicated to the interior of buildings: boxes, partition walls, display cases, sliding doors (manually or automatically operated), double acting and smoke hermetic doors.
The PT 50 system allows to use the variety of fillings: glass, aluminium panels, „sandwich” fillings, panel boards and PVC of width 1 – 40 mm. The structural depth for frame and sash is 52 – 60 mm.
The regular doors or the coplanar doors can be assembled in the PT 50 system. The advantage of axial clamped hinges is an ease of assembly in three planes.

Characteristics of system
– precise relation to other Ponzio systems (mutual corners, beadings, toolset and majority hardware)
– the possibility of facing window sashes (one plane outside) and doors (two planes outside and inside)
– bending profiles
– the variety of door leaves: with wide beam or profiles cut at an angle of 45, with or without threshold
– possibility of assembling smoke hermetic doors

Aluminium profiles
EN AW-6060 according to PN-EN 573-3 T66 according to PN-EN 515 Al Mg Si 0,5 F22 according to DIN 1725 T1, DIN 17 615 T1
Gaskets
EPDM synthetic rubber according to DIN7863 and standard according to ISO 3302-1, E2
Hardware
renowned companies only:Fapim, Savio, Iseo, Cisa, Hautau, Geze, KFV etc.
Fillings
single or packet window panels with any kind of glass or opaque panels
Surface finishing
powder coating with polyester on chromate undercoater according to Qualicoat standards, any RAL colour at choice; anodized in colours: natural aluminium, olive, champagne, gold, brown – according to Qualanod standards, lacquered for colour imitated wood
Acoustic insulation
for glass 44.1/16/6
– moduls indicator RA2 OK238 dB
– moduls indicator RA1 OK134 dB
– moduls indicator Rw  Rw39 dB
Smoke control
Sm and Sa class according to PN-EN 13501-2:2005
Permissions and quality certificates
Technical approval of Building Engineering Institute AT-15-5214/2012 “ System of internal smoke control doors, general applications doors and segments of partition walls of PONZIO PT 50 ”

PONZIO PT 52

System description
The system with thermal insulation is assigned for accomplishment of outside building elements like: wind stoppers, shop windows, sliding front doors rated to the RMG 2.1 material group.
There are plenty of solutions for the window and door construction. The application of thermal insulator ensures correct drainage. The width of frames and sashes is 52 – 60 mm.

PONZIO PE 52

System description
The three-chamber system, design with a profile groove in Euro standard and the groove used in windows and balcony doors made of PVC.
The structural depth of the frame is 52 mm and 60 mm for the wings. The system allows using a wide range of hardware and ease to work. Three-chamber profile provides the element with higher stiffness, thus the construction may be of larger size. Thanks to the modernization of sealing elements, there is no need for a drip, what positively influences the elevation beauty.

Characteristics of system
– precise relation to other Ponzio systems
– many ways of accomplishment of corner connections: torsion, studding or kneading
– two grooves: euro, PVC groove
– bending profiles
– facing sashes and frame profiles (on outside)

Aluminium profiles
EN AW-6060 according to PN-EN 573-3 T66 according to PN-EN 515 Al Mg Si 0,5 F22 according to DIN 1725 T1, DIN 17615 T1
Gaskets
EPDM synthetic rubber according to DIN 7863 and standard according to DIN ISO 3302-1, E2
Hardware
renowned companies only: Sobinco, Savio, Winkhaus, etc.
Fillings
single or packet window panels with any kind of glass or opaque panels of width: 10-43 mm
Surface finishing
powder coating with polyester accoording to the Qualicoat standards, any RAL colour at choice; anodized in colours: natural aluminium, olive, champagne, gold, brown – according to Qualanoad standards, lacquered for colour imitated wood
Thermal insulation
frame heat transfer coefficient Uf = 2,1 – 2,5 W/m2K
Permissions and quality certificates
Initial type tests according PN-EN 14351-1

PONZIO PE 68 WINDOW

System description
The three-chamber system for the windows with “euro” standard hardware groove and groove used in windows and balcony doors made of PVC or wood profiles. The depth of the frame is 68 mm and the depth of leaf is 76 mm. Due to wider, in comparison to the PE 60, 32 mm thermal insulator and one or two component central gasket, we can achieve high high thermal parameters.
There is no need for a drip, what positively influences the beauty of the curtain wall, thanks to the modernization of the sealing elements.
The system allows to use the wide range of hardware and ease their installation. Three-chamber system Ponzio PE 68 permits to set up constructions of large dimensions.
Glass thickness of 18-59 mm can be applied into the system as well as the arched constructions.

Characteristics of system
– close connection to other Ponzio systems
– the possibility of facing windows sashes (one plane outside)
– the possibility of using hi-tech two components EPDM gaskets with perfect thermal insulation. An aesthetic appearance and an ease of assembly
– bending profiles
– many ways of making corner connections

Aluminium profiles
EN AW-6060 according to PN-EN 573-3 T66 according to PN-EN 515 Al Mg Si 0,5 F22 according to DIN 1725 T1, DIN 17615 T1
Gaskets
EPDM synthetic rubber according to DIN7863 and standard according to ISO 3302-1, E2
Hardware
renowned companies only: Sobinco, Savio, Winkhaus, etc.
Fillings
single or packet window panels with any kind of glass or opaque panels
Surface finishing
powder coating with polyester on chromate undercoater according to Qualicoat standards, any RAL colour at choice; anodized in colours: natural aluminium, olive, champagne, gold, brown – according to Qualanoad standards, lacquered for colour imitated wood
Thermal insulation
heat transfer coefficient (for frame) Uf=1,5 W/m2K (basic option)
Permissions and quality certificates
Initial type tests according to PN-EN 14351-1
Certificate of conformity: 2nd RC class of antiburglary according to PN-EN 1627:2011, class R3 according to PN-EN 1627:2012

PONZIO PE 68 DOORS

System description
The three-chamber insulated system for doors. The system has a coplanar structure profiles (notch clearance 18 mm) and the possibility of using glazing beads for “euro” standard groove.
In PE system specially profiled thermal breaks in the width of 24 mm are applied. What is more, specially designed, compatible profiles enable the connection between the door and windows. The structural depth of the frames and sashes is 68 mm.
There is a possibility to apply double and triple glazed units at the width of 51 mm. The frame heat transfer coefficient equals
1,5–2,1 W/m2K.
Wide range of hardware and doors locks can be used. PE 68 allows to make kneaded, as well as screwed corner connections.

PONZIO PE 78N WINDOWS

System description

Three-chamber system with “euro” standard groove and groove used in windows and balcony doors made of PVC or wooden profiles.
It is dedicated for constructions with very high thermal requirements.
The structural depth of profiles for frames is 78mm, for sashes 86mm.
Thanks to multi chamber thermal breaks (42 mm) and two component central gasket we can obtain high thermal insulation. In PE 78N Uf frame heat transfer coefficient equals 1,7 W/m2K. In more insulated version PE78N+, with closed glass chamber, the Uf value equals 1,3 W/m2K.
The system allows to use wide range of hardware and ease the mounting.
Three-chamber profile construction of PE 78N system, provides large stiffness of profile, which allows accomplishing constructions of large dimensions.

Characteristics of system
– precise relation to other Ponzio systems
– the possibility of facing window sashes (one plane out side)
– the possibility od assembling hi-tech two component EPDM gaskets
– the possibility of bending profiles
– many ways of accomplishing corner connections

Aluminium profiles
EN AW-6060 according to PN-EN 573-3 T66 according to PN-EN 515 Al Mg Si 0,5 F22 according to DIN 1725 T1, DIN 17615 T1
Gaskets
EPDM synthetic rubber according to DIN7863 and standard according to ISO 3302-1, E2
Hardware
renowned companies only: Sobinco, Savio, Winkhaus, etc.
Fillings
single or packet window panels with any kind of glass or opaque panels of width: 23-61 mm
Surface finishing
powder coating with polyester on chromate undercoater according to Qualicoat standards, any RAL colour at choice; anodized in colours: natural aluminium, olive, champagne, gold, brown – according to Qualanoad standards, lacquered for colour imitated wood
Thermal insulation
frame heat transfer coefficient Uf=1,3 W/m2K
Permissions and quality certificates
Initial type tests according to PN-EN 14351-1 + A1
Certificate of conformity: 2nd RC class of antiburglary according to PN-EN 1627, 3rd RC class according to PN-EN 1627

PONZIO PE 78N DOORS

System description
The three chamber system for doors with thermal insulation. The system has a coplanar structure profiles (notch clearance 18 mm) and possibility of applying glazing beads for the “euro” standard groove. Profiled thermal breaks of width of 34 mm are applied in PE 78N. Specially designed compatible profiles enable the ease of connection between door and windows. The structural depth for frames and sashes equals 78mm.
The system allows using a wide range of hardware and door locks. PE 78N allows to make kneaded, as well as screwed corners connection. What is more, there can be applied the variety of threshold solutions (also PVC one) to guarantee the best water and thermal insulation.

Aluminium profiles
EN AW – 6060 according to PN–EN 573 -3 T66 according to PN – EN 515 Al Mg Si 0,5 F22 according to DIN 1725 T1, DIN 17615 T1
Gaskets
EPDM synthetic rubber according to DIN 7863 and standard according to ISO 3302-01, E2
Hardware
Renowned companies only: Fapim, Savio, Iseo, Cisa, Geze, GU, Dorma, etc.
Fillings
single or packed window panels with any kind of glass or opaque panels of width: 23-61mm
Surface finishing
powder coating with polyester to the Qualicoat standards, any RAL colour at choice: anodized in colours: natural aluminium, olive, champagne, gold, brown – according to the Qualanod standards, lacquered for colour imitating wood.
Thermal insulation
frame heat transfer coefficient Uf= 1,5 W/m2K.
Permissions and quality certificates
Initial type tests according to PN – EN 14351 – 1 + A1
Certificate of conformity: 2nd RC class of antiburglary according to PN – EN 1627

PONZIO PE 68 HI WINDOWS

PE 68 variant with three-chamber construction, with “euro” standard groove and groove used in windows and balcony doors made of PCV or wooden profiles. The structural depth of profiles for frame equals 68mm, for sashes 76mm. The system allows to apply fillings 18-59mm wide. Additionally the thermal insulation of the system is better because of the special insulating inputs.
The system reaches various heat transfer coefficient depending on the location of insulating inserts.
In PE 68HI version – with closed glass chamber and insulating insert in the profile chamber – reaches Uf value from 1,3 W/m2K.

PONZIO PE 78N HI WINDOWS

A variant of PE78N system intended for the constructions of a particularly high requirements for thermal insulation. Thanks to the special inserts there can be obtained very high thermal insulation.
In more insulated PE78N HI version – with closed glass chamber and insulating insert, the Uf frame heat transfer coefficient equals 0,9 W/m2K. In the most insulated (PE 78N HI+) version – with closed glass chamber and insulating insert made of aerogel, the frame heat transfer coefficient equals 0,7 W/m2K.

Aluminium profiles
EN AW-6060 according to PN–EN 573-3 T66 according to PN–EN 515 Al Mg Si 0,5 F22 according to DIN 1725 T1, DIN 17615 T1
Gaskets
EPDM synthetic rubber according to DIN 7863 and standard according to ISO 3302-01, E2
Hardware
Renowed comapanies only: Sobinco, Savio, Siegenia, Winkhaus etc.
Fillings
single or packed window panels with any kind of glass or opaque panels of width: 23-61 mm
Surface finishing
powder coating with polyester to the Qualicoat standards, any RAL colour at choice: anodized in colours: natural aluminium, olive, champagne, gold, brown – according to the Qualanod standards, lacquered for colour imitating wood.
Permissions and certificates
Initial type tests according to PN–EN 14351–1
Certificate of conformity: 2nd RC class of antiburglary according to PN – EN 1627, 3rd RC class according to PN -EN 1627