Fasāžu sistēmas

PONZIO PF 152 HI
SINGLE GLAZED UNIT

System description

The transom post construction system assigned for accomplishment of curtain walls, rooves and skylights with the higher thermal insulation.
The width of posts and transoms equals 52 mm, for beads 51 mm. The technical solutions allows to construct straight and curve walls, interior and exterior angles and winder gardens. The system can be assembled with the support construction made of steel or wood.
Having used specially designed thermal break, there is a possibility to build walls with frame heat-transfer coefficient Ucw = 1,15 W/m2K (for 28 mm single glazed unit).

Characteristics of system
– solution for lintel window sill belt classified for EI60
– possibility of assembling various decorative external elements
– possibility of accomplishing of either horizontal or vertical lines
– possibility of bending profiles

Aluminium profiles
EN AW-6060 according to PN – EN 573-3 T66 according to PN-EN 515 Al Mg Si 0,5 F22 according to DIN 1725 T1, DIN 17615 T1
Gaskets
EPDM synthetic rubber according to DIN 7863 and standard according to ISO 3302-01, E2
Hardware
renowned companies only: Fapim, Geze, Security Style, Roto, Dorma, Esco, etc.
Fillings
single or packet window panels with any kind of glass or opaque panels of width: 23 – 42 mm
Surface finishing
powder coating with polyester according to the Qualicoat standards, any RAL colour at choice; anodized in colours: natural aluminium, olive, champagne, gold, brown – according to Qualanod standards, lacquered for colour imitating wood
Thermal insulation
frame heat transfer coefficient U0 = 1,13 W/m2K with 24 mm thermal insulator
Permissions and quality certificates
Initial type tests according to PN-EN 13830

PONZIO PF 152ESG

System description

Non-frame curtain wall with the structural glazing assigned for the realization of lightweight facades and other spacial constructions. The post-transom construction of PF 152 system is used as a load bearing element. The external side of PF 152ESG is uniform, smooth glass wall divided with vertical and horizontal lines at width 22 mm using weather silicon or at width 28 mm using the closing gasket. There is a possibility of assembling double and triple glazed units.

Characteristics of system
– construction of tilt windows next to each other, opening autonomously
– two ways of finishing wall surface: silicones or specially designed masking gasket
– single, packet window panels or opaque panels in the width of 26, 28mm, the possibility of assembling triple glazed units (in the width of 60mm)
– in the standard version the U0 frame heat transfer coefficient equals 1,6 W/m2K
– in the facade with triple glazing the U0 frame heat transfer coefficient equals 1,3 W/m2K

Aluminium profiles
EN AW-6060 according to PN-EN 573-3 T66 according to PN-EN 515 Al MG Si 0,5 F22 according to DIN 1725 T1, DIN 17615 T1
Gaskets
EPDM synthetic rubber according to DIN 7863 and standard according to ISO 3302-1, E2
Hardware
renowed companies only: Fapim, Geze, Security Style, Roto, Dorma, Esco, etc.
Fillings
single or packet window panels with any kind of glass or opaque panels in the width of 26, 28 mm possibility of assembling triple glazed units (glass: 60 mm thick)
Surface finishing
powder coating with polyester on chromate undercoater according to the Qualicoat standards, any RAL colour at choice; anodized in colours: natural aluminium, olive, champagne, gold, brown – according to Qualanod standards, lacquered for colour imitating wood
Thermal insulation
frame heat transfer coefficient U0 from 1,3 W/m2K
Permissions and quality certificates
Initial type tests according to PN-EN 13830

PONZIO NT 152SG

System description

The transom – post construction system is assigned for accomplishment of structural walls and it is rated to the RMG 1.0 material group.
The wall’s construction is based on full or half posts and transoms, which width is 52 mm. The external side is uniform, smooth glass wall divided with vertical and horizontal lines at width of 16 mm. There are some solutions for glass assembly: structural glazing or mechanical grip.
The individual shapes of curtain wall can be made, thanks to the above-mentioned options.

Permissions and quality certificates

European Technical Approval of Building Engineering Institute ETA-08/0288 “Structural Sealant Glazing Kit for the use in curtain walling”.

PONZIO PF 152HI DOUBLE GLAZED UNIT

System description

Post-transom curtain wall system with high thermal insulation, most commonly assembled in energy effcient constructions. Specially designed insulating input, which fills the space between glass panels, with its shape and characteristics, improves parameters of the whole construction. The composition of used material provides very goods drainage and thanks to its shape the mounting is easy.The assembly is possible after glazing. Thermal parameters allow to achieve the Ucw thermal value at the level of 0,6 W/ m2K (when 48 mm filling is applied).

Characteristics of system
– solution for lintel window sill belt classified for EI60
– possibility of assembling various decorative external elements
– possibility of accomplishment of either horizontal or vertical lines
– possibility of bending profiles
– fillings: 38 – 66 mm

Aluminium profiles
EN AV-6060 according to PN-EN 573-3 T66 according to PN-EN 515 Al Mg Si 0,5 F22 according to DIN 1725 T1, DIN 17615 T1
Gaskets
EPDM synthetic rubber according to DIN 7863 and standard according to ISO 3302 – 01, E2
Hardware
renowed comapnies only: Fapim, Geze, Security Style, Roto, Dorma, Esco, etc.
Fillings
single or packet window panels with any kind of glass or opaque panels in the width between: 38-56 mm
Surface finishing
powder coating with polyester according to Qualicoat standards, any RAL colour at choice; anodized in colours: natural aluminium, olive, champagne, gold, brown – according to Qualanod standards, laquered for colour imitating wood
Thermal insulation
frame heat transfer coefficient U0= 0,67 W/m2K with 48mm thermal insulator
Permissions and quality certificates
Initial type tests according to PN – EN 13830, Certificate of the Passive House Institute in Darmstadt

PONZIO PF 152WG
WINTER GARDENS

System description

The system for winter gardens or other spacial constructions. The construction of roof slope can be accomplished with facade profiles from PF152 system or on the base of PF152WG rafters.
The whole construction can be based on curtain wall posts, posts from windows and doors systems, as well as on the reinforced posts from PF152WG system. The rafter construction allows to use standard glazing beads from windows and doors systems. The connection between rafters and transoms is the same as in the PF152 curtain wall system. The elements of the roof are fixed by hinge connection on the wall beam and by means of system joints on the eaves beam with system pipe for eaves. There is a possibility of using sliding systems from Ponzio offer.

Characteristics of system
– allows to connect the profiles from PF152 WG system, windows and doors system, as well as Ponzio sliding systems
– allows to accomplish very complex constructions (used in the elements of eaves beam and wall beam, “articulated” system allows to turn the plane of the roof in the range between 7- 45 degrees of the inclination to the vertical plane)
– easy assembly and prefabrication

Aluminium profiles
EN AW-6060 according to PN-EN 573-3 T66 according to PN-EN 515 Al Mg Si 0,5 F22 according to DIN 1725 T1, DIN 17615 T1 Gaskets
EPDM synthetic rubber according to DIN 7863 and standard according to ISO 3302-1, E2
Fillings
packet window panels, opaque panels polycarbonate 8-40 mm thick
Surface finishing
powder coating with polyester on chromate undercoater according to Qualicoat standards, any RAL colour at choice; anodized in colours: natural aluminium, olive, champagne, gold, brown – according to Qualanoad standards, lacquered for colour imitating wood